SEEN ON THIS PAGE
Supply Line Holder
The Connector
Bar Sleeve Clamp
Smoke Ejector Holder
Hard Suction Hose Support
Supply Line Holder
Couples supply hose securely to any portable water tank
Features:
-
Added filling source
-
Minimizes waste and turbulence
-
Frees up manpower for other important duties
-
Recirculation - maintains prime and cools the pump
-
Fill from a distance - relay pump from a water source to the dump tanks when shuttling is feasible
-
Aluminum casting
-
NST and Storz available
-
Pump tested to 200 PSI for single supply line holder
-
Round housings in 2.5"-3" sizes, and square housings in 4" sizes & larger
(NFPA 1142 Compliant)
|
Part No. |
Sizes |
|
SLHS-2.5 |
2 1/2" / 6cm |
|
SLHS-3 |
3" / 8 cm |
|
SLHS-4.0 |
4" / 10 cm |
|
SLHS-5.0 |
5" / 12.7 cm |
|
SLHD-2.5 (Dbl.) |
2 1/2" / 6 cm |
|
SLHD-3 (Dbl.) |
3" / 8 cm |
|
SLHD-2.5 / 3 |
2 1/2" - 3" / 6-8 cm |
4" - 5" Supply Line Holder
The 4" - 5" holder clamps easily to any portable water tank. The design helps to free hands of the firefighter, prevents waste and turbulence.
Construction Features:
THE "CONNECTOR"
Connect Two (or more) Fol-Da-Tanks Together
Shown with 40" long drain sleeve
When ordering a new tank or liner for use with the Connector make sure to specify your equalizer sleeve with the 40" length.
Features:
-
No priming necessary
-
Equalizes water levels
-
Easily stored
-
Rugged aluminum castings
-
10" standard size
|
Part No. |
Size |
|
PTCS-10 |
10" / 25cm |
Bar Sleeve Clamp
Controls water flow between tanks
Part No. BSLC
Smoke Ejector Holder w/Hooks Included
Part No. SEH
The Smoke Ejector Holder is made from 6061 aluminum tubing with heavy duty ratchet adjustment to exert maximum pressure for secure holding against any door jamb or window frame. The rubber grip pads tightly grip to smooth surfaces and easily adjusts from 28" - 40". The Smoke Ejector Holder is adaptable to most S.E. fans and will hold up to 115 lbs when installed properly.
Features:
-
Comes with 1 set of hanger hooks
-
Extra sets of hanger hooks available
-
Rubber pads pliable to -40°
-
Maintainence free
-
Light weight (6 lbs)
-
Longer lengths available
Hard Suction Hose Support
.JPG)
This lightweight aluminum hose stand is designed to support a large diameter hose when filling and draining a Self-Supporting Tank or Rol-LaTank®. This hard suction hose support stores easily in limited spaces or the Rol-La-Tank® storage bag.